Iintsimbi zeAustenitic 304 • UNS S30400 • 1.4301

Inkcazo emfutshane:

Iityhubhu zentsimbi engagqwaliyo zeTP304
Njengentsimbi engenasici esetyenziswa kakhulu, i-TP304 inomxube we-alloy olinganiselayo kwaye ungabizi kakhulu, inika ukwakheka okugqwesileyo kokubanda, ukumelana nokugqwala, ukuqina kunye neempawu zoomatshini kunye nokuqina okuncinci.
Isebenza ngokuthembekileyo kwiindawo ezicocekileyo, kodwa idla ngokutshintsha umbala okanye ibe nomhlwa omncinci kwiindawo ezifumileyo zoshishino, unxweme kunye nolwandle.
Yamkelwe ngokubanzi kwimibhobho yamanzi okusela nakwiinkqubo zokubonelela ngamanzi acocekileyo, ifuna amanyathelo afanelekileyo okuthintela ukugqwala okubangelwa yimfumba.
Ngaphandle kokhuseleko olwaneleyo lwe-galvanic okanye i-cathodic, ayibonakali ikwazi ukumelana kakuhle namanzi olwandle angenamoya. Le nto ikwanozinzo olubalaseleyo kunye nokuqina kwesakhiwo phantsi kweemeko ezingaqhelekanga.

Inqanaba leThubhu:TP304, AISI 304, EN 1.4301

Uhlobo lwetyhubhu:Idityanisiwe, Idityanisiwe kwaye Itsaliwe, Ayinamthungo

Ifomu yeThubhu:Iziqwenga Ezithe Tye, Ezigobileyo, Ezigobileyo, Ezisikiweyo Ezide

Ukugqitywa komphezulu:I-Annealed Eqaqambileyo, I-Annealed & I-Pickled, Ikhazimlisiwe

Imigangatho (i-ASME/ASTM):ASME SA /ASTM A249, A213, A269, A312

Imigangatho (EN):I-EN 10217-7, EN 10296-2, EN 10216-5, EN 10297-2

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iityhubhu zentsimbi engagqwaliyo ezingama-304, iityhubhu zentsimbi engagqwaliyo eziyi-1.4301

Umbhobho weNtsimbi engagqwaliyo	ASTM A312, A358 / ASME SA312, SA358
Ityhubhu yentsimbi engagqwaliyo	ASME SA213, A269, A249, A511, ASME SA213, SA269, SA249, SA511,
Ubungakanani bepayipi:	Ubungakanani be-OD obuyi-1/8” NB ukuya kwi-24” NB, ubungakanani be-OD obuyi-1/4” OD ukuya kwi-32” OD.
Ubungakanani betyhubhu:	Ukusuka kwi-1/4″ ukuya kwi-5″ OD.
Uluhlu Lobukhulu:	0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Uhlobo:	Ayinamthungo / Idibeneyo
Ifomu:	Ijikelezileyo
Ubude:	I-Single Random, i-Double Random kunye ne-Diasonal Length/U Bend efunekayo
Isiphelo :	Isiphelo Esicacileyo, Isiphelo Esinezithende
Ukhuseleko Lokuphela:	Iikhephu zeplastiki
Isiphelo sangaphandle:	2B,BA,AP
Imeko yokuhanjiswa:	Ifakwe i-Annealed kwaye i-Pickled, Ifakwe i-Annealed eqaqambileyo, Itsalwe ngokubandayo
Uhlolo, Iingxelo zoVavanyo:	Izatifikethi zoVavanyo lweMill, EN 10204 3.1
Ukupakisha:	Ipakishwe kwiibhokisi zomthi, okanye ngokwezicelo zabathengi
Izinto ezikhethekileyo:	Ubungakanani kunye neenkcukacha ezingezizo ezingentla zingenziwa xa ziceliwe

TP 304 .UNS S30400. 1.4301 Ulwakhiwo lweekhemikhali

Ulwakhiwo lweeKhemikhali (nge-% ngobunzima)
Ibanga	C	Si	Mn	P	S	Cr	Ni	Mo	Ti	N	Ezinye
	UMax.	UMax.	UMax.	UMax.	UMax.
304	0.08	1.00	2.00	0.045	0.030	18.0 – 20.0	8.0 – 11.0
1.4301	0.07	1.00	2.00	0.045	0.015	17.5 – 19.5	8.0 – 10.5			0.10

Ipropati yoomatshini ye-TP 304 .UNS S30400. 1.4301

Ipropati yoomatshini kunye nonyango lobushushu
Ibanga	I-Rp 0.2 Mpa	I-Rp 1.0 Mpa	Rm Mpa	A (%)	Ubunzima (HRB)	Unyango lobushushu
	Ubuncinci.	Ubuncinci.	Ubuncinci. – Ubuninzi.	Ubuncinci.	UMax.
304	205		515	35	90	Isisombululo esiqhotyoshelweyo
1.4301	195	230	500 – 700	40		Isisombululo esiqhotyoshelweyo